Rain Bird ASVF PVC Anti-Siphon Valve 3/4 in. FIPT with Flow Control

Rain Bird ASVF PVC Anti-Siphon Valve 3/4 in. FIPT with Flow Control

$17.02

Description

Rain Bird ASVF PVC Anti-Siphon Valve 3/4 in. FIPT with Flow Control

Rain Bird manufactures only the highest quality Anti-Siphon valves. Use Anti-Siphon valves in locations where the use of a pressure vacuum breaker (PVB) or a double-check valve is required by city codes to protect against back flow. Check your local city codes to determine what type of valves are required.

Anti-Siphon valves are installed above ground and will prevent back flow if properly installed. Anti-Siphon valves should always be installed at least 6″ above the highest head on the valve line, and should never have another valve installed further down the line from the main valve. Our Anti-Siphon valves also feature our patented vacuum breaker–available for automatic or manual applications. All of our Anti-Siphon valves work with any standard sprinkler timer.

FEATURES

  • Combination of the reliable DVF Angle valve and atmospheric backflow preventer in one unit
  • Incorporates all features of DV/DVF Series valves
  • I.A.P.M.O. and A.S.S.E. listing approved
  • City of Los Angeles listing approved
  • Not recommended for use with two-wire control systems

 

ASVF Anti-siphon Valve Manual

Additional information

Item

Connection Type

FIPT

Connection Size

3\/4 in.

Body Material

PVC

Type

Anti-Siphon

Includes

with Flow Control

Regulated

No

Brand Name

Rain Bird

Pressure

15 to 150 psi (1,0 to 10,4) bar

075-ASVF Flow

0.2 to 22 GPM (0,05 to 5,0 m³/h; 0,01 to 1,39 l/s). For flows below 3 GPM (0,68 m³h; 0,19 l/s) or any Landscape Drip products application, use a 200 mesh filter installed upstream

100-ASVF Flow

0.2 to 40 GPM (0,05 to 9,085 m³/h; 0,01 to 2,52 l/s). For flows below 3 GPM (0,68 m³h; 0,19 l/s) or any Landscape Drip products application, use a 200 mesh filter installed upstream

Water temperature

Up to 110°F (43°C)

Ambient air temperature

Up to 125°F (52°C)

24 VAC 50/60Hz (cycles per second) solenoid power requirement

0.450A inrush current; 0.250A holding current

Solenoid coil resistance

38 Ohms