Rain Bird DVF Globe Valve Plastic 1 in. w/ Flow Control Slip x Slip

Rain Bird DVF Globe Valve Plastic 1 in. w/ Flow Control Slip x Slip

SKU: 100DVFSS Category:

$15.24

Compare

Description

Rain Bird DVF Globe Valve Plastic 1 in. w/ Flow Control Slip x Slip

  • 1 in. (26/34) Slip-by-Slip (SS) configuration for low cost, solvent-weld installations
  • Unique, easy-to-turn patented pressure assisted flow control mechanism
  • Double-filtered pilot-flow design for maximum reliability
  • Balanced-pressure diaphragm for long life
  • External bleed to manually flush system of dirt and debris during installation and system start-up
  • Internal bleed for spray-free manual operation
  • Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter

Rain Bird manufactures only the highest quality valves. Use DV/DVF series valves in locations where the use of a separate pressure vacuum breaker (PVB) or a double-check valve is required by city codes to protect against back flow. Check your local city codes to determine what type of valves are required.

Additional features:

  • All of our valves work with any standard sprinkler timer.
  • Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring.
  • Operates in low-flow and Xerigation® applications when the RBY filter is installed upstream.
  • 1.25 in. (3,2 cm) stainless steel phillips head screws.
  • Accepts latching solenoid for use with Rain Bird battery-operated controllers.

 

 

Additional information

Item

Connection Type

Slip x Slip

Connection Size

1 in.

Body Material

Plastic

Regulated

No

Brand Name

Rain Bird

Valve Size

1 in

Valve Type

Inline

Material

Plastic

Valve Inlet/Outlet Configuration

Slip x Slip

Valve Options

Flow Control

Valve Series

DV/DVF

Operating Temperature

Up to 110° F (43° C)

Dimensions

Height: 4 1/2" (11,4 cm)
Width: 3 1/3" (8,4 cm)
Length: 4 3/8" (11,1 cm)

Electrical Specifications

24 VAC 50/60 Hz (cycles per second) solenoid power requirement:
0.30 A (7.2 VA) inrush current; 0.23 A (5.5 VA) holding current
Solenoid coil resistance: 38 Ohms

Flow Range

0.2 to 40 gpm (0,75 m3/h; 0,21 l/s); for flows below 3 gpm or any Xerigation application, use a 200 mesh filter installed upstream.

Operating Pressure

15 to 150 psi (1,0 to 10,4 bar)